Stainless Steel Commercial Juice Extractor , Fruit Juicer for Household

Stainless Steel Commercial Juice Extractor , Fruit Juicer for Household

Description:

1. Shinning Stianless Steel Housing.
2. All parts are dishwasher safe.
3. Pulp container: 2 L,Juicing Jar: 1 L.
4. Micro-mesh Filter made of Stainless Steel.
5. Juices at speed with the powerful 800watt Motor.
6. Juice hard or soft fruits with multiple speed settings.
7. Extra Large feeding tube swallows whole Fruit and vegetables.

Application:

drink shops, fruit shop, restaurants, hotels, bars, card rooms, tea show, cafe, etc.

Specification:

Characteristic:

Super wide feed opening can hold a whole apple with quick speed and high efficiency

Powerful horsepower motor could produce 84% percent syrup at a time.

Special safely and convenient handle switch

Streamline project plastic body with five star qualities

Detailed Photo:

Before Operation:

A. Power supply of 110v-240v The power supply must have the safety system to connect with the ground.

Please don’t replace the machine’s cable by yourself.
B. Check the lid whether lock closely with the bower centering (You can pull the spigot of juice for cask that

made of stainless steel if it not move, it’s correct .If it is lax you can readjust the lock pin
C.Connect to the power supply and turn on the machine, examine the machine with your eyes and ears to

make sure the function normal before normal work.

Operation Procedure:

1)Please clean the fruit or vegetable you want to squeeze before squeeze and peel off the husk.(For

example:orange,watermelon).Some fruit like peach and apricot they have the firm pip you must take out

them or it will shatter machine .

2)Cutting the pulp into piece or block smaller than the size of the ostium for putting the pulp.

Then put them into clean container.When turn on the machine you can put the pulp into ostium continuously or use the fruit pusher, then the fresh juice will pour from the ostium

3) If you want to change fruit or vegetable the machine worked in normally, infusing clean water into ostium it will be cleaned and the peculiar smell will be resisted.

After Operation:
If you want to clean or change the blade and centrifugation basket after you use the machine over.You must turn off the power then you can open the lid and screw the nut, take out the blade, centrifugation basket to clean completely (Don’t move the other parts lest should effect the quality for boot-strap). Finally install the parts with reversed sequence. Putting on the lid then the machine can work normally again.

Application Photo: