Squeezed Automatic Orange Juicer Machine

Fresh Squeezed Automatic Orange Juicer Machine / Orange Juice Maker 110v - 220v

Konmax Orange Juicer Machine Description:

1) Elegant shape
The machine looks modern and luxury, be popular all over the world
2)Good material
The shell is made of Plastic transparent face over, the face mask is made of transparent plastic, and the

knaggy ball is made of food-grade plastic. So it is anti-corrosion, reliable enough, and easy to clean.
3)Rational structure
The compact design makes it higher efficiency. The ratio is as high as 40%, just put oranges in, you will

get  very fresh and delicious juice in a few seconds.
4) Easy to operate
Press the button, the juice will come out in a few seconds, and the juice and residue can be departed

automatic.
5)Wide usage
The machines can be used in entertainments, restaurants, hotel, bars etc.
The machine is suitable for oranges with 40-80mm diameter.

Konmax Orange Juicer Machine Application:

The machine apply to small drink shops, fruit shop, restaurants, hotels, bars, the Office of cards, tea - and  coffee houses, a very wide range of applications.

Konmax Orange Juicer Machine Specification:

Konmax Orange Juicer Machine Detailed Photo:

Konmax Orange Juicer Machine Accessory:

Two protruding balls ,blade compages ,concave squeezer ,peelers ,peeler seats ,plastic veils ,pressing 

screw , two concave balls .

Konmax Orange Juicer Machine Operation Instruction:

1.  Place the machine on the stable table, connect power plug to a grounded connector plug. 

2.  Safety check before you turn on the machine:

     1) If the nut (4 units) screw down properly.

     2) If place the knife rest correctly (press it on the bottom).

     3) Place the cover on, screw down two side nut (2 units).

3. It can be used after turn on the power.

4．Put antisepsis and washed fresh oranges (40-80mm) in, the machine will peel the skin, producing

      fresh juices, filtrate automatically

Konmax Orange Juicer Machine Cleaning Instruction:

1.Wrench screws of the  front cover and take off the cover .

2.Take off the holder of the peel razor 

3.Wrench screws on the ball.Hold the machine with both hands,and use two fingers to take off the plastic 

balls .Do not use one hand only because this may cause injury.Since the spinning angels of axles are 

different.sometimes you need to take off(or put on)the two corresponding top and bottom ball at the same 

time .

4.take off the center of the valve of the juicer tank.

5.Take off the mesh filter 

6.Clean the all parts mentioned in the instruction book .

7.Clean the garbage can in times .