120W Automatic Zumex Orange Juicer / Commercial Fruit Juicer Machines For Fresh Juice

120W Automatic Zumex Orange Juicer / Commercial Fruit Juicer Machines For Fresh Juice
Konmax Orange Juicer Machine Specification:

Konmax Orange Juicer Machine Detailed Photo:

Stainless steel fruit basket can hold 10-15 oranges 

Counter system : This model with counter which you can know how many orange squeezed every day .

Cross system can make yield high to 60%-70%

automatic Stainless steel tap : when you press tap the machine start squeezing , when you stop machine stop working .

Filter function : makes the juice tast better and not stuck the tap 
 

Konmax Orange Juicer Machine Accessory:
Two protruding balls ,blade compages ,concave squeezer ,peelers ,peeler seats ,plastic veils ,pressing screw ,two concave balls .

Each machine we will set one set wearing parts together .
Konmax Orange Juicer Machine Production Scene:

Konmax Orange Juicer Machine Operation Instruction:
1.  Place the machine on the stable table, connect power plug to a grounded connector plug. 
2.  Safety check before you turn on the machine:
     1) If the nut (4 units) screw down properly.
     2) If place the knife rest correctly (press it on the bottom).
     3) Place the cover on, screw down two side nut (2 units).
3. It can be used after turn on the power.
4．Put antisepsis and washed fresh oranges (40-80mm) in, the machine will peel the skin, producing  fresh juices, filtrate automatically
 

Konmax Orange Juicer Machine Cleaning Instruction:
1.Begin by unplugging the juicer.
2.Disassemble the juicer completely.
3.Dump the bin or container that catches the pulp and scrape it out with a spatula.
4.Rinse each piece under running water.
5.Use the small brushes to clean the small areas, there are small brushes available such as nail brushes
that can be used to clean the nooks and crannies.
6.For more thorough cleanings, fill the sink with water and add dish soap.
7.Soak each piece for a few minutes and then wash with a brush or soft cloth.
8.Pay special attention to the mesh strainer as this can quickly build up with pulp and juice debris. Do not
allow the juice particles to dry in this fine screen or they will be difficult to remove.
9.Use a soft cloth or sponge moistened with water to wipe down the machine itself. Although the juice is
designed to go through a certain route in the juicer, juice and pulp will end up everywhere.
10.Allow all of the pieces to dry completely. It is fine to set them on a towel or drying rack.
11.Reassemble the juicer.

 Youtube Link Please check :