|Place of Origin:||China|
|Minimum Order Quantity:||10PCS|
|Delivery Time:||15 days after receiving payment|
|Payment Terms:||TT,L/C WEST UNION ,PAYPAL|
|Supply Ability:||2000 PCS one month|
|Color:||Stainless Steel Color||Frequency::||50Hz/60Hz|
|Blade Material::||3mm Thickness 304 Stainless Steel||Orange Size::||40-90mm|
High Output Industrial Orange Juice Extractor With Automatic Feeder For Restaurant
Automatic orange juicer machine use centrifugal principel to make juice from oranges , lemons , grapes etc
You do not need cut the fruits , the machine would cut into half and squeeze itself .
|Material||Stainless steel||Delivery time||20FT: 10days; 40HQ: 15days|
|orange size||40--90mm||Output||35-40 oranges/ mins|
|Package size||675*510*1770MM||Certificate||CE approval available|
|40' HQ loading||58PCS||FOB Shanghai||USD|
|20' FT loading||24PCS||Warranty||1 Year|
Two protruding balls ,blade compages ,concave squeezer ,peelers ,peeler seats ,plastic veils ,pressing
screw ,two concave balls .
1.Make sure the power pressure is 110v/60hz or 220v/50hz .Electrical outlet needs to be above 10AMP
and have grounded power .
2..Put 2 pcs peg in the net and blade of the machine , screw the nut and close the cover .
3.This machine is not workable for the fruit with hard core or less moisture , such as peanut and banana .
4..Use the enclosed feed stick but not other stick to avoid damage the machine .
5. Keep the residue outlet un-blocked .
6..Do not clean the outside of the machine by water directly to avoid electricity leakage or other accident .
7.Turn off the power and pull out plug before washing the machine .
1.Begin by unplugging the juicer.
2.Disassemble the juicer completely.
3.Dump the bin or container that catches the pulp and scrape it out with a spatula.
4.Rinse each piece under running water.
5.Use the small brushes to clean the small areas, there are small brushes available such as nail brushes
that can be used to clean the nooks and crannies.
6.For more thorough cleanings, fill the sink with water and add dish soap.
7.Soak each piece for a few minutes and then wash with a brush or soft cloth.
8.Pay special attention to the mesh strainer as this can quickly build up with pulp and juice debris. Do not
allow the juice particles to dry in this fine screen or they will be difficult to remove.
9.Use a soft cloth or sponge moistened with water to wipe down the machine itself. Although the juice is
designed to go through a certain route in the juicer, juice and pulp will end up everywhere.
10.Allow all of the pieces to dry completely. It is fine to set them on a towel or drying rack.
11.Reassemble the juicer.