China Kingmax Industrial Co.,ltd.
High Quality Beverage Machine Professional Supplier
|Place of Origin:||china|
|Minimum Order Quantity:||10PCS|
|Packaging Details:||Inner carton box , outer wood box|
|Delivery Time:||15 days after receiving payment|
|Payment Terms:||TT,L/C ,WEST UNION ,PAYPAL|
|Supply Ability:||1000 pcs one month|
|Material:||304 Stainless Steel||Fruit::||Orange/lemon/pomegranate|
|Knaggy Ball::||Food-grade Plastic||Working Mode::||Automatic Cutting And Peeling Off|
commercial orange juice squeezer,
orange juice maker machine
Small Orange Juicing Machine Stainless Steel Cold Pressed Juicer Machine For Juice Shop
1.Power supply:220--230V 50HZ /110--120V 60HZ
3.Size of orange required:40--80mm
4.Output: 22-25 oranges/per minute
5.Machine Size: 400L*300W*770H mm(length*width*height)
6.Net Weight: 42kg
7．Security: Safety cut out switches
The machines will stop operating without the cover place.
8. ConVeyance: Qty/20' FCL: 120sets
|Material||Stainless steel||Delivery time||20FT: 10days; 40HQ: 15days|
|orange size||40--80mm||Output||20 oranges/mins|
|Package size||410*310*780MM||Certificate||CE approval available|
|40' HQ loading||290PCS||FOB Shanghai||USD|
|20' FT loading||120PCS||Warranty||1 Year|
|Function/Feature||Safety cut out switches Touchpad Switch,
Internal circuit board. sensor ,counter
Two protruding balls ,blade compages ,concave squeezer ,peelers ,peeler seats ,plastic veils ,
pressing screw ,two concave balls .
Avoid dangerous please followed by the next step:
1. Ensure read and understand all the explanations.
2. Only use the specifically charger(230V/50HZ,120V/60HZ).
3. For the safety purpose,only use connect power to the grounded connector plugs.
4. Do not put machine on the power supply.
5. Ensure machine is out of the work and turn off the power before you clean it.
6. Do not touch the power connect plug.
7. Only used for citrus and lemon. Do not used for other fruit.
8. Do not use for peach, mango etc, in case it damage.
9. Do not put your hands in the machine while it working.
1.Begin by unplugging the juicer.
2.Disassemble the juicer completely.
3.Dump the bin or container that catches the pulp and scrape it out with a spatula.
4.Rinse each piece under running water.
5.Use the small brushes to clean the small areas, there are small brushes available such as nail brushes
that can be used to clean the nooks and crannies
6.For more thorough cleanings, fill the sink with water and add dish soap.
7.Soak each piece for a few minutes and then wash with a brush or soft cloth.
8.Pay special attention to the mesh strainer as this can quickly build up with pulp and juice debris. Do not
allow the juice particles to dry in this fine screen or they will be difficult to remove.
9.Use a soft cloth or sponge moistened with water to wipe down the machine itself. Although the juice is
designed to go through a certain route in the juicer, juice and pulp will end up everywhere.
10.Allow all of the pieces to dry completely. It is fine to set them on a towel or drying rack.
11.Reassemble the juicer.
Youtube Link Please check :
Contact Person: Miss Zhang